ChemicalBook > Product Catalog > Organic Chemistry > Hydrocarbons and derivatives > Aromatic hydrocarbons > Naphthalene
- Product Name:Naphthalene
- Synonyms: 'LGC' (2402) 'LGC' (2603) 1-NAPHTHALENE TAR CAMPHOR NAPTHALENE NAPTHALIN Albocarbon Camphor tar
- Product Categories: NA - NIAnalytical Standards NaphthalenesChemical Class Neats N-OAlphabetic Pesticides PAH Intermediates of Dyes and Pigments Naphthalene Organoborons Highly Purified Reagents Other Categories Zone Refined Products Analytical Chemistry Standard Solution of Volatile Organic Compounds for Water & Soil Analysis Standard Solutions (VOC) Chemistry Naphthalenes Analytical Standards AromaticsVolatiles/ Semivolatiles Volatiles/ Semivolatiles Arenes Building Blocks Organic Building Blocks Alpha Sort Chemical Class FumigantsVolatiles/ Semivolatiles Hydrocarbons Insecticides N
- Mol File:91-20-3.mol
Naphthalene Chemical Properties
- Melting point:80-82 °C(lit.)
- Boiling point:218 °C(lit.)
- Density 0.99
- vapor density 4.4 (vs air)
- vapor pressure 0.03 mm Hg ( 25 °C)
- refractive index 1.5821
- Flash point:174 °F
- storage temp. APPROX 4°C
- solubility methanol: soluble50mg/mL, clear, colorless
- form Faint beige to brown to salmon red powder
- color White to almost white
- Specific Gravity1.145
- explosive limit0.9-5.9%(V)
- Water Solubility 30 mg/L (25 ºC)
- Merck 14,6370
- BRN 1421310
- Henry's Law Constant5.64 at 25 °C (thermodynamic method-GC/UV spectrophotometry, Altschuh et al., 1999)
- Exposure limitsTLV-TWA 10 ppm （～50 mg/m3) (ACGIH, MSHA, and OSHA); STEL 15 ppm (～75 mg/m3) (ACGIH); IDLH 500 ppm.
- CAS DataBase Reference91-20-3(CAS DataBase Reference)
- NIST Chemistry ReferenceNaphthalene(91-20-3)
- EPA Substance Registry SystemNaphthalene(91-20-3)
- Hazard Codes Xn,N,F,T
- Risk Statements 22-40-50/53-67-65-38-11-39/23/24/25-23/24/25-52/53-20
- Safety Statements 36/37-46-60-61-62-45-16-7-33-25-9
- RIDADR UN 1334 4.1/PG 3
- WGK Germany 3
- RTECS QJ0525000
- Autoignition Temperature978 °F
- TSCA Yes
- HazardClass 4.1
- PackingGroup III
- HS Code 29029010
- Hazardous Substances Data91-20-3(Hazardous Substances Data)
- ToxicityAcute oral LD50 for guinea pigs 1,200 mg/kg, mice 533 mg/kg, rats 1,250 mg/kg (quoted, RTECS, 1985).
Naphthalene Usage And Synthesis
- descriptionNaphthalene is a white solid chemical that vaporizes easily. It has a strong smell. You can sometimes smell naphthalene in the air or in water. Called white tar and tar camphor, naphthalene is used in mothballs and moth flakes. Petroleum and coal contain naphthalene.
Naphthalene, the simplest of the fused or condensed ring hydrocarbon compounds composed of two benzene rings sharing two adjacent carbon atoms. Naphthalene is the most abundant single constituent of coal tar, a volatile product from the destructive distillation of coal, and is also formed in modern processes for the high-temperature cracking (breaking up of large molecules) of petroleum.
1-Methylnaphthalene and 2-methylnaphthalene are naphthalene-related compounds. 1-Methylnaphthalene is a clear liquid and 2-methylnaphthalene is a solid; both can be smelled in air and in water at very low concentrations. 1-Methylnaphthalene and 2-methylnaphthalene are used to make other chemicals such as dyes and resins. 2-Methylnaphthalene is also used to make vitamin K.
- In industry, naphthalene is used to manufacture a plastic called polyvinyl chloride (PVC). In public restrooms, naphthalene can be found in toilet deodorant blocks. At home, naphthalene can be found in moth repellents.
- Naphthalene balls are extensively used as household preservative of woolen clothes and as a deodorant tablet for the toilets, urinals, bathrooms etc. These are manufactured from naphthalene flakes by a tabletmaking machine having its ball shape die.
- Naphthalene is an important hydrocarbon raw material and is primarily used to manufacture phthalic anhydride and polyvinyl chloride (PVC) plastics, but is also used in moth repellents and toilet deodorant blocks.
- Naphthalene was used in liquid-phase exfoliation of graphite in organic solvents for the production of graphene sheets. It was used in preparation of carbon-coated Si 70 Sn 30 nanoparticles.
- It was used as fluorescent probe to study the aggregation behavior of sodium cholate.
- It was used to investigate influence of added short chain linear and branched alcohols on the binding of 1:1 complex of naphthalene and β-cyclodextrin.
- Health HazardMost of the data available on the toxic effects of naphthalene have been derived from animal studies conducted either in vivo or with in vitro preparations.
Rats and mice breathing naphthalene vapors daily for a lifetime had irritated noses and nose tumors and irritated lungs. Some female mice had lung tumors. Some animals got cloudy eyes after ingesting it.
It is not clear if naphthalene causes reproductive problems in animals. Although there is no direct data showing that naphthalene can cause cancer in people, naphthalene exposure can lead to cancer in animals.
Exposure to large amounts of naphthalene may damage or destroy red blood cells, a condition called hemolytic anemia. Symptoms of hemolytic anemia are feeling very tired or restless, lack of appetite, and pale skin. Exposure to large amounts of naphthalene may also cause upset stomach, diarrhea, blood in the urine,and yellow-colored skin. Very young children and unborn children are at higher risk if they are exposed to naphthalene, especially if they ingest the chemical. Some infants have become ill when they were close to clothing or blankets stored in naphthalene mothballs.
- ToxicityNaphthalene is a white solid substance with a strong smell. Poisoning from naphthalene destroys or changes red blood cells so they cannot carry oxygen. This can cause organ damage.
In humans, naphthalene is broken down to alpha-naphthol, which is linked to the development of hemolytic anemia. Kidney and liver damage may also occur. Alpha-naphthol and other metabolites are excreted in urine.
In animals, naphthalene breaks down into other compounds including alpha-naphthol, which may affect the lungs and eyes. Naphthalene was found in the milk of exposed cows, but the residues disappeared quickly after the cows were no longer exposed. Nearly all the naphthalene was broken down into other compounds and excreted in their urine.
- DescriptionNaphthalene occurs as transparent prismatic plates also available as white scales, powder balls, or cakes with a characteristic mothball or strong coal tar and aromatic odour. It is sparingly soluble in water but soluble in methanol/ethanol and very soluble in ether. Naphthalene is a commercially important aromatic hydrocarbon. Naphthalene occurs as a white solid or powder. Naphthalene occurs in coal tar in large quantities and is easily isolated from this source in pure condition. It volatilises and sublimes at room temperature above the melting point. The primary use for naphthalene is in the production of phthalic anhydride, also of carbamate insecticides, surface active agents and resins, as a dye intermediate, as a synthetic tanning agent, as a moth repellent, and in miscellaneous organic chemicals. Naphthalene is used in the production of phthalic anhydride; it is also used in mothballs. Naphthalene is also used in the manufacture of phthalic and anthranilic acids to make indigo, indanthrene, and triphenyl methane dyes, for synthetic resins, lubricant, celluloid, lampblack, smokeless powder, and hydronaphthalenes. Naphthalene is also used in dusting powders, lavatory deodorant discs, wood preservatives, fungicide, and as an insecticide. It has been used as an intestinal antiseptic and vermicide and in the treatment of pediculosis and scabies.
- Chemical PropertiesNaphthalene is a colorless to brown crystalline solid with a characteristic “moth ball” odor. Shipped as a molten solid.
- Chemical Propertieswhite to almost white crystals, crystalline flakes
- Physical propertiesNaphthalene is a crystalline, white, flammable, polycyclic aromatic hydrocarbon consisting of two fused benzene rings. It has a pungent odor and sublimes readily above its melting point; it has been traditionally used in moth balls and is responsible for the moth balls characteristic odor. Naphthalene is a natural component of fossil fuels and is the single most abundant component of coal tar, accounting for approximately 11% of dry coal tar.
- HistoryIn 1819, naphthalene was obtained as white crystals during the pyrolysis of coal tar by John Kidd (1775–1851), a British physician and chemist, and Alexander Garden (1757–1829), an American living in Britain. Kidd described the properties of the white crystals he obtained from coal tar and proposed the named naphthaline for the substance; naphthaline was derived from naphtha, a general term for a volatile, fl ammable, hydrocarbon liquid. Michael Faraday (1791–1867) determined the correct empirical formula for naphthalene in 1825, and Richard August Carl Emil Erlenmeyer (1825–1909) proposed the fused benzene ring structure in 1866.
- UsesIn addition to oxidation and reduction reactions, naphthalene readily undergoes substitutionreactions such as nitration, halogenation, sulfonation, and acylation to produce a varietyof other substances, which are used in the manufacture of dyes, insecticides, organic solvents,and synthetic resins. The principal use of naphthalene is for the production of phthalic anhydride,C8H4O3.
Naphthalene is catalytically oxidized to phthalic anhydride: 2C10H8 + 9O2 → 2C4H8O3 +4CO2 + 4H2O using metal oxide catalysts. Phthalic anhydride is used to produce plastics,phthalate plasticizers, insecticides, pharmaceuticals, and resins. Sulfonation of naphthalene withsulfuric acid produces naphthalenesulfonic acids, which are used to produce naphthalene sulfonates.Naphthalene sulfonates are used in various formulations as concrete additives, gypsumboard additives, dye intermediates, tanning agents, and polymeric dispersants. Naphthalene isused to produce carbamate insecticides such as carbaryl, which is a wide-spectrum, generalpurposeinsecticide.
- UsesNaphthalene is used as a moth repellent; inscintillation counters; and as a raw materialin the manufacture of naphthol, phthalic anhy-dride, and halogenated naphthalenes. It is alsoused in dyes, explosives and lubricants, andin breaking emulsion.
- Usesmanufacture of phthalic and anthranilic acids which are used in making indigo, indanthrene, and triphenylmethane dyes. manufacture of hydroxyl (naphthols), amino (naphthylamines), sulfonic acid and similar Compounds used in the dye industries. manufacture of synthetic resins, celluloid, lampblack, smokeless powder. manufacture of hydronaphthalenes (Tetralin, Decalin) which are used as solvents, in lubricants, and in motor fuels. Moth repellent and insecticide.
- DefinitionChEBI: An aromatic hydrocarbon comprising two fused benzene rings. It occurs in the essential oils of numerous plant species e.g. magnolia.
- DefinitionA white crystalline solid with a
distinctive smell of mothballs. Naphthalene
is found in both the middle- and
heavy-oil fractions of crude oil and is obtained
by fractional crystallization. It is
used in the manufacture of benzene-1,2-dicarboxylic
anhydride (phthalic anhydride and thence in the production of plastics
The structure of naphthalene is ‘benzene- like’, having two six-membered rings fused together. The reactions are characteristic of AROMATIC COMPOUNDS.
- Definitionnaphthalene: A white volatilesolid, C10H8; r.d. 1.025;m.p. 80.55°C; b.p. 218°C. Naphthaleneis an aromatic hydrocarbon withan odour of mothballs and is obtainedfrom crude oil. It is a raw materialfor making certain syntheticresins.
- Production MethodsNaphthalene is produced from coal tar or petroleum. It is made from petroleum by dealkylationof methylnaphthalenes in the presence of hydrogen at high temperature and pressure.Petroleum was a major source of naphthalene until the 1980s, but now most naphthaleneis produced from coal tar. The pyrolysis of bituminous coal produces coke and coke ovengases. Naphthalene is condensed by cooling the coke gas and then separated from the gas.
- Air & Water ReactionsHighly flammable. Insoluble in water.
- Reactivity ProfileVigorous reactions, sometimes amounting to explosions, can result from the contact between aromatic hydrocarbons, such as Naphthalene, and strong oxidizing agents. They can react exothermically with bases and with diazo compounds. Substitution at the benzene nucleus occurs by halogenation (acid catalyst), nitration, sulfonation, and the Friedel-Crafts reaction. Naphthalene, camphor, glycerol, or turpentine will react violently with chromic anhydride [Haz. Chem. Data 1967. p 68]. Friedel-Crafts acylation of Naphthalene using benzoyl chloride, catalyzed by AlCl3, must be conducted above the melting point of the mixture, or the reaction may be violent [Clar, E. et al., Tetrahedron, 1974, 30, 3296].
- Hazard Toxic by inhalation. Upper respiratory tract irritant, cataracts and hemolytic anemia. Possible carcinogen.
- Health HazardInhalation of naphthalene vapor may causeirritation of the eyes, skin, and respiratorytract, and injury to the cornea. Other symptoms are headache, nausea, confusion, andexcitability. The routes of exposure of thiscompound into the body are inhalation, ingestion, and absorption through the skin; andthe organs that may be affected are the eyes,liver, kidney, blood, skin, and central nervoussystem.
The most severe toxic effects from naphthalene, however, may come from oral intakeof large doses of this compound. In animals, as well as in humans, ingestion of largeamounts may cause acute hemolytic anemiaand hemoglobinuria attributed to its metabolites, 1- and 2-naphthol and naphthoquinones.Infants are more sensitive than adults becauseof their lower capacity for methemoglobinreduction. Other symptoms from ingestion ofnaphthalene are gastrointestinal pain and kidney damage. The LD50 values reported inthe literature show variation among differentspecies. In mice, an oral LD50 value may beon the order of 600 mg/kg. Symptoms of respiratory depression and ataxia were noted.
Chronic exposure to naphthalene vapormay affect the eyes, causing opacities of thelens and optical neuritis. The acute effectsfrom inhalation of its vapors at high concentrations are nausea and vomiting.
Inhalation studies have shown positivetumorigenic response in mice. Studies conducted under National Toxicology Program(NTP) show clear evidence of carcinogenicityin rats resulting from inhalation of naphthalene vapors (NTP 2000). Increased incidencesof respiratory epithelial adenoma and olfactory epithelial neuroblastoma in the nose wereobserved in both the sexes of rats. On thebasis of these findings IARC has reevaluatednaphthalene and reclassified it under Group2B carcinogen, as possibly carcinogenic tohumans (IARC 2002)..
- Health HazardFire may produce irritating and/or toxic gases. Contact may cause burns to skin and eyes. Contact with molten substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution.
- Fire HazardFlammable/combustible material. May be ignited by friction, heat, sparks or flames. Some may burn rapidly with flare burning effect. Powders, dusts, shavings, borings, turnings or cuttings may explode or burn with explosive violence. Substance may be transported in a molten form at a temperature that may be above its flash point. May re-ignite after fire is extinguished.
- Safety ProfileHuman poison by ingestion. Experimental poison by ingestion, intravenous, and intraperitoneal routes. Moderately toxic by subcutaneous route. An experimental teratogen. Experimental reproductive effects. An eye and skin irritant. Can cause nausea, headache, daphoresis, hematuria, fever, anemia, liver damage, vomiting, convulsions, and coma. Poisoning may occur by ingestion of large doses, inhalation, or skin absorption. Questionable carcinogen with experimental tumorigenic data. Flammable when exposed to heat or flame; reacts with oxidizing materials. Explosive reaction with dinitrogen pentaoxide. Reacts violently with CrOs, aluminum chloride + benzoyl chloride. Fires in the benzene scrubbers of coke oven gas plants have been attributed to oxidation of naphthalene. Explosive in the form of vapor or dust when exposed to heat or flame. To fight fire, use water, CO2, dry chemical. When heated to decomposition it emits acrid smoke and irritating fumes.
- Potential ExposureNaphthalene is used as a chemical
intermediate or feedstock for synthesis of phthalic, anthranilic,
hydroxyl (naphthols), amino (naphthylamines), and sulfonic
compounds; which are used in the manufacture of
various dyes and in the preparation of phthalic anhydride, 1-naphthyl-N-methyl carbonate; and β-naphthol. Naphthalene
is also used in the manufacture of hydronaphthalenes, synthetic
resins; lampblack, smokeless powder; and celluloid.
Naphthalene has been used as a moth repellent.
Approximately 100 million people worldwide have G6PD deficiency which would make them more susceptible to hemolytic anemia on exposure to naphthalene. At present, more than 80 variants of this enzyme deficiency have been identified. The incidence of this deficiency is 0.1% in American and European Caucasians, but can range as high as 20% in American blacks and greater than 50% in certain Jewish groups. Newborn infants have a similar sensitivity to the hemolytic effects of naphthalene, even without G6PD deficiency.
- SourceSchauer et al. (1999) reported naphthalene in diesel fuel at a concentration of 600 μg/g
and in a diesel-powered medium-duty truck exhaust at an emission rate of 617 μg/km. Detected in
distilled water-soluble fractions of 87 octane gasoline (0.24 mg/L), 94 octane gasoline (0.21
mg/L), Gasohol (0.29 mg/L), No. 2 fuel oil (0.60 mg/L), jet fuel A (0.34 mg/L), diesel fuel (0.25
mg/L), military jet fuel JP-4 (0.18 mg/L) (Potter, 1996), and used motor oil (116 to 117 μg/L)
(Chen et al., 1994). Lee et al. (1992) investigated the partitioning of aromatic hydrocarbons into
water. They reported concentration ranges from 350 to 1,500 mg/L and 80 to 300 μg/L in diesel
fuel and the corresponding aqueous phase (distilled water), respectively. Diesel fuel obtained from
a service station in Schlieren, Switzerland contained 708 mg/L naphthalene (Schluep et al., 2001).
California Phase II reformulated gasoline contained naphthalene at a concentration of 1.04 g/kg.
Gas-phase tailpipe emission rates from gasoline-powered automobiles with and without catalytic
converters were approximately 1.00 and 50.0 mg/km, respectively (Schauer et al., 2002).
Thomas and Delfino (1991) equilibrated contaminant-free groundwater collected from Gainesville, FL with individual fractions of three individual petroleum products at 24–25 °C for 24 h. The aqueous phase was analyzed for organic compounds via U.S. EPA approved test method 625. Average naphthalene concentrations reported in water-soluble fractions unleaded gasoline, kerosene, and diesel fuel were 989, 644, and 167 ug/L.
Based on laboratory analysis of 7 coal tar samples, naphthalene concentrations ranged from 940 to 71,000 ppm (EPRI, 1990). Detected in 1-yr aged coal tar film and bulk coal tar at concentraions of 26,000 and 29,000 mg/kg, respectively (Nelson et al., 1996). A high-temperature coal tar contained naphthalene at an average concentration of 8.80 wt % (McNeil, 1983). Nine commercially available creosote samples contained naphhalene at concentrations ranging from 3,800 to 52,000 mg/kg (Kohler et al., 2000). Lee et al. (1992a) equilibrated eight coal tars with distilled water at 25 °C. The maximum concentration of naphthalene observed in the aqueous phase was 14 mg/L.
Naphthalene was detected in soot generated from underventilated combustion of natural gas doped with toluene (3 mole %) (Tolocka and Miller, 1995).
Typical concentration in a heavy pyrolysis oil is 17.8 wt % (Chevron Phillips, May 2003). Detected in asphalt fumes at an average concentration of 1.15 ng/m3 (Wang et al., 2001).
An impurity identified in commercially available acenaphthene (Marciniak, 2002).
Schauer et al. (2001) measured organic compound emission rates for volatile organic compounds, gas-phase semi-volatile organic compounds, and particle-phase organic compounds from the residential (fireplace) combustion of pine, oak, and eucalyptus. The gas-phase emission rate of naphthalene was 227 mg/kg of pine burned. Emission rates of naphthalene were not measured during the combustion of oak and eucalyptus.
- Environmental FateBiological. In activated sludge, 9.0% of the applied amount mineralized to carbon dioxide after
5 d (Freitag et al., 1985). Under certain conditions, Pseudomonas sp. oxidized naphthalene to cis-
1,2-dihydro-1,2-dihydroxynaphthalene (Dagley, 1972). This metabolite may be oxidized by
Pseudomonas putida to carbon dioxide and water (Jerina et al., 1971). Under aerobic conditions,
Cunninghamella elegans degraded naphthalene to 1-naphthol, 2-naphthol, trans-1,2-dihydroxy 1,2-dihydronaphthalene, 4-hydroxy-1-tetralone, and 1,4-naphthoquinone. Under aerobic conditions,
Agnenellum, Oscillatoria, and Anabaena degraded naphthalene to 1-naphthol, cis-1,2-
dihydroxy-1,2-dihydronaphthalene, and 4-hydroxy-1-tetralone (Kobayashi and Rittman, 1982;
Riser-Roberts, 1992). Candida lipolytica, Candida elegans, and species of Cunninghamella,
Syncephalastrum and Mucor oxidized naphthalene to 1-naphthol, 2-naphthol, trans-1,2-
dihydroxy-1,2-dihydronaphthalene, 4-hydroxy-1-tetralone, 1,2-naphthoquinone, and 1,4-naphthouinone
(Cerniglia et al., 1978, 1980; Dodge and Gibson, 1980).
Soil. The half-lives of naphthalene in pristine and oil-contaminated sediments are >88 d and 4.9 h, respectively (Herbes and Schwall, 1978). Reported half-lives for naphthalene in a Kidman sandy loam and McLaurin sandy loam are 2.1 and 2.2 d, respectively (Park et al., 1990).
Surface Water. The volatilization half-life of naphthalene from surface water (1 m deep, water velocity 0.5 m/sec, wind velocity 22.5 m/sec) using experimentally determined Henry’s law constants is estimated to be 16 h (Southworth, 1979). The reported half-lives of naphthalene in an oil-contaminated estuarine stream, clean estuarine stream, coastal waters, and in the Gulf stream are 7, 24, 63, and 1,700 d, respectively (Lee, 1977). Mackay and Wolkoff (1973) estimated an evaporation half-life of 2.9 h from a surface water body that is 25 °C and 1 m deep. In a laboratory experiment, the average volatilization half-life of naphthalene in a stirred water vessel (outer dimensions 22 x 10 x 21 cm) at 23 °C and an air flow rate of 0.20 m/sec is 380 min. The half-life was independent of wind velocity or humidity but very dependent upon temperature (Kl?pffer et al., 1982).
Groundwater. The estimated half-life of naphthalene in groundwater in the Netherlands was 6 months (Zoeteman et al., 1981). Nielsen et al. (1996) studied the degradation of naphthalene in a shallow, glaciofluvial, unconfined sandy aquifer in Jutland, Denmark. As part of the in situ microcosm study, a cylinder that was open at the bottom and screened at the top was installed through a cased borehole approximately 5 m below grade. Five liters of water was aerated with atmospheric air to ensure aerobic conditions were maintained. Groundwater was analyzed weekly for approximately 3 months to determine naphthalene concentrations with time. The experimentally determined first-order biodegradation rate constant and corresponding half-life following a 6-d lag phase were 0.8/d and 20.8 h, respectively.
Photolytic. Irradiation of naphthalene and nitrogen dioxide using a high pressure mercury lamp (λ >290 nm) yielded the following principal products: 1- and 2-hydroxynaphthalene, 1-hydroxy-2- nitronaphthalene, 1-nitronaphthalene, 2,3-dinitronaphthalene, phthalic anhydride, 1,3-, 1,5- and 1,8-dinitronaphthalene (Barlas and Parlar, 1987). In a similar experiment, naphthalene crystals was heated to 50 °C and exposed to pure air containing NO and OH radicals. Photodecomposition followed first-order kinetics indicating the concentration of OH radicals remained constant throughout the reaction. Degradation products identified by GC/MS were 1-naphthol, 2-naphthol, 1-nitronaphthalene, 2-nitronaphthalene, 1,4-naphthoquinone, 1,4-naphthoquinone-2,3-epoxide, 3- nitrophthalic anhydride, phthalic anhydride, 4-methyl-2H-1-benzopyran-2-one, 1(3H)-isobenzofuranone, 1,2-benzenecarboxaldehyde, cis-2-formyl-cinnamaldehyde, trans-2-formylcinnamaldehyde, and phthalide. The following compounds were tentatively identified: 2,7-naphthalenediol, 2-nitro-1-naphthol, 4-nitro-1-naphthol, and 2,4-dinitro-1-naphthol. Photoproducts identified by HPLC included: benzoic acid, cinnamic acid, 2,4-dinitro-1-naphthol, 2-formylcinnamic acid, cis-2-formylcinnamaldehyde, trans-2-formylcinnamaldehyde, 1-nitronaphthalene, 2-nitronaphthalene, 1-naphthol, 2-naphthol, 1,4-naphthoquinone, 1,4-naphthoquinone-2,3-epoxide, 3-nitrophthalic anhydride, oxalic acid, phthalic acid, phthalaldehyde, and phthalide (Lane et al., 1997).
Chemical/Physical. An aqueous solution containing chlorine dioxide in the dark for 3.5 d oxidized naphthalene to chloronaphthalene, 1,4-dichloronaphthalene, and methyl esters of phthalic acid (Taymaz et al., 1979). In the presence of bromide ions and a chlorinating agent (sodium hypochlorite), major products identified at various reaction times and pHs include 1- bromonaphthalene, dibromonaphthalene, and 2-bromo-1,4-naphthoquinone. Minor products identified include chloronaphthalene, dibromonaphthalene, bromochloronaphthalene, bromonaphthol, dibromonaphthol, 2-bromonaphthoquinone, dichloronaphthalene, and chlorodibromonaphthalene (Lin et al., 1984).
- ShippingUN1334 Naphthalene, crude or Naphthalene, refined, Hazard Class: 4.1; Labels: 4.1-Flammable solid. UN2304 (molten) Hazard Class: 4.1; Labels: 4.1-Flammable solid.
- Purification MethodsCrystallise naphthalene once or more times from the following solvents: EtOH, MeOH, CCl4, *C6H6, glacial acetic acid, acetone or diethyl ether, followed by drying at 60o in an Abderhalden drying apparatus. It has also been purified by vacuum sublimation and by fractional crystallisation from its melt. Other purification procedures include refluxing in EtOH over Raney Ni and chromatography of a CCl4 solution on alumina with *benzene as eluting solvent. Baly and Tuck [J Chem Soc 1902 1908] purified naphthalene for spectroscopy by heating with conc H2SO4 and MnO2, followed by steam distillation (repeating the process), and formation of the picrate which, after recrystallisation (m 150o) is decomposed with base and the naphthalene is steam distilled. It is then crystallised from dilute EtOH. It can be dried over P2O5 under vacuum (take care not to make it sublime). Also purify it by sublimation and subsequent crystallisation from cyclohexane. Alternatively, it has been washed at 85o with 10% NaOH to remove phenols, with 50% NaOH to remove nitriles, with 10% H2SO4 to remove organic bases, and with 0.8g AlCl3 to remove thianaphthalenes and various alkyl derivatives. Then it is treated with 20% H2SO4, 15% Na2CO3 and finally distilled. [Gorman et al. J Am Chem Soc 107 4404 1985.] Zone refining purified naphthalene from anthracene, 2,4-dinitrophenylhydrazine, methyl violet, benzoic acid, methyl red, chrysene, pentacene and indoline. [Beilstein 5 IV 1640.]
- IncompatibilitiesDust may form explosive mixture with air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Violent reactions with chromium(III) oxide, dinitrogen pentoxide; chromic anhydride.
- Waste DisposalDissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal.
Naphthalene Preparation Products And Raw materials
- Raw materialsPETROLEUM ETHERBiphenylKAOLINCOAL TARCOAL TARIndeneETHYLENE1,2,3,4-TetrahydronaphthaleneDODECYLBENZENETechnical naphthalenePhenol oil
- Preparation ProductsPhthalic anhydride1-Naphthol2-NaphtholBenzoic acid1-AminonaphthaleneGlyceriteLinolenic acid2-Amino-4,8-naphthalenedisulfonic acidDIBENZANTHRONENAPHTHENIC ACIDPeri acid1-Naphthalene acetic acid1'-Acetonaphthone1-Aminonaphthalene-6-sulfonic acid5-Amino-1-naphthalenesulfonic acidVat Yellow 21,4,5,8-Naphthalenetetracarboxylic acid2-Methylbutane1-IodonaphthaleneBUTYLNAPHTHALENESULFONIC ACID SODIUM SALT1,5-Naphthalenedisulfonic acidVat Yellow 4Vat Brown 5Slushing agent,high efficiencySEC-BUTYLAMINEBARIUM DINONYLNAPHTHALENESULFONATESlushing agent1,5-Dihydroxy naphthalenesynthetic fiber oil QDC-201disodium methylenebisnaphthalenesulphonate1-NitronaphthaleneSodium poly[(naphthaleneformaldehyde)sulfonate]2,6-DIMETHYLNAPHTHALENEDispersing agent DNdispersing agent CNF1-Naphthol-5-sulfonic acid
- Anthracene Phenanthrene 9,10-DIAMINOPHENANTHRENE PHENANTHRENE-9-CARBOXALDEHYDE 9-CHLOROANTHRACENE 9-Bromophenanthrene 9-AMINOPHENANTHRENE RARECHEM AL BD 0654 9-ACETYLPHENANTHRENE 3,6-DIMETHYLPHENANTHRENE 9,10-Dibromoanthracene 9-Bromoanthracene 9-Anthrracenecarbonitrile 2-ACETYLPHENANTHRENE 9-CYANOPHENANTHRENE 2-METHYLPHENANTHRENE ANTHRACENE-D10 Nabumetone
- Company Name:Shanghai Macklin Biochemical Co.,Ltd. Gold
- Products Intro:Product Name:Naphthalene solution
Purity:Standard for GC,>=99.5%(GC) Package:2ml
- Company Name:Hangzhou QiFei Chemical Co., Ltd. Gold
- Tel:0571-28950939 18058801870
- Products Intro:CAS:91-20-3
- Company Name:J & K SCIENTIFIC LTD.
- Tel:400-666-7788 +86-10-82848833
- Products Intro:Product Name:Naphthalene, 99%
- Company Name:Meryer (Shanghai) Chemical Technology Co., Ltd.
- Tel:+86-(0)21-61259100(Shanghai) +86-(0)755-86170099(ShenZhen) +86-(0)10-62670440(Beijing)
- Products Intro:Product Name:Naphthalene
Purity:99% Package:250g;1kg Remarks:AAA125343
- Company Name:3B Pharmachem (Wuhan) International Co.,Ltd.
- Tel:86-21-50328103 * 801、802、803、804 Mobile:18930552037
- Products Intro:Product Name:Naphthalene
Purity:99% HPLC Package:1Mg ; 5Mg;10Mg ;100Mg;250Mg ;500Mg ;1g;2.5g ;5g ;10g